Still waiting for picts..........

Okay, that's interesting, will look at that when I get around to building/upgrading mine around July - August 2015.  It seems like a great idea, though.  So, cos I'm not visualising it right now, would these addons/connectors make available those PCI/PCIE slots that are often made inaccesssible by large/multiple GPU cards?

So the Noctua has a mounting bracket that's fitted to the mobo before it's installed... and then the cooler is fitted?  With the Thermaltake in my AMD machine, the mounting pins are connected to the cooler and must be poked through the designated holes in the mobo.  Once through, you need to hold the cooler in one hand while placing the nuts on the pins and tightening them... and with one pair of hands you need extra long arms or pretty near be a contortionist to be on both sides of the case at once.... hence I used the above method to make it easier on myself.

Oh well, it seems you have it under control... and the tidy [hardly seen] cabling is possible with a bit of Percy Verance.  I met him in my early PC days when cases weren't at all cabling friendly.  I managed to get some pretty decent results even back then, but these modern cases are so much easier to work with, and if you use the cable holes wisely you can pretty much hide the majority of cabling between the mobo tray and side cover, with just a few cables intruding inside for the mobo, GPU and any 3rd party cards requiring power.

Yes.

As I said earlier...Yrag put me on to their stuff ....and since using it I'll probably stick with them in preference.  They don't go in for 'bling' ....just function...

Yeah, I know what you mean... it does leave too much to the imagination, and at my age I dunno if I have alot of that left.

Thing is, I also know what it's like to have a new case and a heap of super-duper stuff to put in it. 

It's like: "Fech the photographs, let's get this baby together... NOW!!!

With a bit of luck we may get to see some piccies of this beastie soon... hint, hint.

Okay, that's handy to know for future reference... cos that Thermaltake cooler was a mongrel to install.  One thing is assured!  The bastard ain't coming out again.  No siree, it's staying right where it is... permanently.  Why Thermaltake didn't design it with a mounting bracket is beyond me.  I mean, with their time and experience in the PC hardware industry, surely they could have seen it was the best way/solution to installing it. 

Oh well, it's not something that will concern me again.  The next build/upgrade will have either Corsair or Coolermaster liquid cooling, which is easy to fit and isn't so large and cumbersome, thus allowing for better airflow within the case in the absence of all that bulk. 

Yup, the Thermaltake cooler is a BIG lump of a thing... like Avanda Manstone but much prettier. 

starkers, i have but one word for ya ........ thermaltake.    you knew that was coming, didn't ya?

There it is....size of a small city....full of 'clever bits' and the number '221' onit...

The 'innards'.

The masking tape holds the CPU cover in place so I don't inadvertently get grubby fingers on the back of the cpu .... it's in...as is the cooler bracket.... just waiting on the Ram so it can go in and then the Cooler.

That 'thing' just to the right of the 'A' in ASUS is the vertical M.2 hooked straight into the MoBo ...just 'above' the first pair of SATAs.

From the look of it, the only thing stopping an eATX from 'fitting' is lack of screw-hole layout for the standoffs to the right ...and the cable holes would be half covered.  I reckon with a bit of DIY I could have used the Rampage Extreme afterall.  Doesn't come anywhere near the inlet fan at all...

    That's big alright. Seeing it on your bench gives it a better sense of scale.  I'd need to install additional floor supports under my trailer just to hold it up!

Really nice, Paul. Congrats.

MadDeez

reply 172

starkers, i have but one word for ya ........ thermaltake.    you knew that was coming, didn't ya?

 

Yup, I knew it was coming.  In fact I'm surprised it didn't come about 10 - 15 posts ago. 

You're slacking off, John, you're slacking off.

Thing is, I've had a good run with Thermaltake products and have enjoyed using them.

Yes, they could have designed that cooler better, making it easier to install, but thus far that'd be my only complaint.

But on a scale of 1 to 10, my satisfaction level is 9.9999 and I'd have no hesitation using Thermaltake products again.

However, as much as I'd love to have a case like Paul's, preferably in black, my next one is likely to be a Coolermaster Cosmos II.

I very much like it's design, the cooling options and additional HDD space in the lower compartment.

Yessssss... the more I think about it.........

Small city my arse.... there are smaller solar systems.

'Tis very impressive indeed... and I'm not jealous one little bit

However, I have upped my sedatives so the wait 'til July/Aug next year is somewhat doable.

Yes, now I get it... a very good idea indeed, and it would allow the use of PCIE slots covered by large/multiple GPUs.

I had an idea it may have been something like that.  Thing is, I've had cases in the past that didn't have the full compliment of 'standoffs' to the right for mobos I wanted to use, so I just screwed down the left and centre screws.  The board still sat snugly and was well enough secured, despite couple of inches or so hanging over.  As for the cable holes being covered, they're still usable... you just feed the cables through before tightening down the board, or feed them through on an angle towards the right... left from the back.

EDIT:

After seeing the pics and giving it more thought, the Delux mobo actually looks quite good with that case, and probably better than the Rampage Extreme... appearance and colour-wise, that is.  The blacks and reds of the Rampage board I believe would look better in a black case, which fortunately for me the Coolermaster Cosmos II is.  Thing is, if extreme performance is what you're after and appearance isn't that important, I don't suppose it matters that much... especially if you don't have a see-through side cover.

I will go with the Rampage Extreme board when the time comes... cos red and black really suit my mood/personality... though not in a somre way.  I just like black and red, even more when they're bright, shiny black and red.

With all the 'high end' gear you get all sorts of stickers...you know....'powered by ASUS' etc.... but I wont be putting any of them on this thing....

On my current one the only one I used was one I pulled of my original IBM XT ....about an inch square...says 'IBM XT'.

Pretending it's a sleeper...

None of my cases has windows .... which is a good thing....cos all of them [apart from this new one] are wired by a madman who can tangle a one inch lead...

Once this one is up and running...and replacing the current....that's going to get a full rebuild....100% restoration, as they say.  It's dusty AND untidy.

I put a Gigabyte and Soundblaster X-FI sticker on an El cheapie case a few years back, but there was no such thought with my Level 10 or previous Thermaltake case. And I'm pleased you decided to opt out also... would have been an extreme case of sacrilege, had you defaced it with stickers.

That's sad, really, really sad... no windows to inspect the work you've done... but then if you're a madman who could garrote a CPU fan and stop it from running, maybe it is best there's no windows.  I am pleased to see the "apart from this new one", tho.... that case demands absolute respect, cpmpete reverence.

Me, I just have to have the cabling and case interior as tidy as it can be... and each time I get better at it, too.  I'm pretty suire I will go with the Coolermaster Cosmo II, and looking at the pics of the interior it looks like a fantastic case to work with... lots of cabling and cooling options... oodles of room for the Rampage board and a couple of large GPUs should I decide to SLI x2 GTX770s at my disposal.

Well...it's Saturday here....and tomorrow I get the last pieces of the puzzle...the ram....the PSU and one more platter HD....

Maybe tomorrow night I can get it all 'together'.

I've since upgraded my True Image from 2013 to 2015 ....as the 'plan' is now to transfer this OS complete to the new machine...in order [hopefully] to NOT need to reinstall the [currently] 160 gig of FSX [not to mention everything else].

If it's successful it'll save literally weeks of playing catch-up,

This box is just on 5.5 years old, as is the OS install... so there's a lot of 'stuff' that's been added and tweaked over that time.

Maybe a little will need revision/refreshing due to processor/GPU improvements...but Drive addresses will mostly be the same...so registrations will still...er...register.  The OS and Office might whinge .... not sure if True Image provides the solution to that too... or whether I'll be calling India instead.....

...ah...bit more research....

If you have the Ultimate version of True Image, you should have no problem with transfering the OS and installed programs to the new machine.  In the ultimate version there is a section to relocate to 'Dissimilar Hardware'.  Now I'm not too sure about your FSX, given it is on a different drive to the OS, but as I recall [haven't used/seen it for a while] you should be able to designate which drives/partitions you want to move over using this function.

Anyway, all the best and I hope it all goes smoothly.